Stage Ape Lighting Stage Ape Lighting



.

.



Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
The Ape ALLI...

9 channel RGB DMX laser

Powered by a Red 150mW; Green 50mW; Blue 300mW. Modes include: Auto, sound, DMX and Master/Slave.

This is a very bright and powerful laser that is a great addition to any light show. Dip swtiches built in, mic with sensitivity knob for sound active function. DMX XLR IN and OUT connections. Power switch key lock on the rear of the unit.

Unit size 14" x 14" x 6" weight 11 Lbs.

***This class 3B laser complies with FDA regulation title 21 CFR1040.10 and CR1040.11 and meets safety regulations EN 60825-1:2007***


ALLI
stage ape Click Here To Purchase stage ape

Instructions for Operation:

Auto Mode:

Set dip switches #1 and #10 to the ON position for this fixture to run in Auto mode.

ADDI
Sound Active Mode:

Set dip switch #10 to the ON position for this fixture to run in Sound Active mode.
ALLI

DMX Mode:


Set the first fixture to the desired DMX value (1-255). If this is the first fixture in your DMX chain, set the DMX value to 1, which is dip switches #1 and #10 in the ON position. Connect the fixture to the controller through a DMX cable.

Channel #1
    0-69  Off
    70-139  Sound Active
    140-209  Auto mode
    210-255  Manual mode

Channel #2
    0-33  Static patterns
    34-255  Dynamic patters

Channel #3
    0-255  Strobe (slow-fast)

Channel #4
    0-255  Line to spot effect

ADDI

Channel #5
    1-160  Manual horizontal movement
    161-190  Move from left to right
    191-220  Move from right to left
    221-255  Right and left in-phase movement

ADDI

Channel #6
    1-160  Manual vertical movment
    161-190  Move from left to right
    191-220  Move from right to left
    221-255  right and left in-phase movement

Channel #7
    0-255  Pattern size (small-large)

Channel #8
    0-255  Color selection

Channel #9
    0-255  Reset

ADDI
Master/Slave Mode:

Set the first fixture to a sound or auto mode setting. Connect the slave/s fixtures using a DMX cable. On the slave fixtures, set the dip switches on the rear of the unit to show #8 and #10 in the on position. The slave fixture will start doing the same thing as the master.

Includes black power cord.
127 London

Click Here To Purchase

Back

2013 by Stage Ape Lighting