Stage Ape Lighting Stage Ape Lighting



.

.


Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage ape The Ape BANQUET... stage ape
**NEW BIG BATTERY POWERED LED with WIRELESS DMX**

Uses 6 x 12 watt RGBW 4 in 1 LEDs

This fixture is completely wireless, making it the prime fixture for any event. Exceptional control in auto mode gives you the ability to: color change, fade in color change, fade out color change, and full on board mixology which gives you DMX color mixing control with 255 sahdes of each color (Blue, Red Green and White). The fixture uses a lithium cell baterry that will last up to 5 hours with all LEDs on at full brightness and longer with a lesser intensity.

Modes Include: DMX, master/slave, sound active, auto modes and color mixing

8 channel DMX.

Wireless DMX allows you to run a DMX cable from your controller to the first fixutre or one of our REBEL Wireless Transmitters and the rest of your Banquet fixtures will connect and be controlled wirelessly. Wireless transmitting maximum distance is 300 meters.

Mounting bracket doubles as an adjustable floor stand.

Power linking

Power cosumption 75 watts

Unit size 10" x 9" x 4" weight 7Lbs
BANQUET
stage ape Click Here To Purchase stage ape

Lux Reading at 1 Meter


Red      984
Green   1,180
Blue      1,345
White    1,005
All On   4,100


Battery:


The fixture uses a lithium cell battery that will last up to 5 hours with all LEDs on at full brightness and longer with lesser intensity. With only one or two colors on, the battery can last up to 10 hours. The battery charge light is next to the on/off switch on the top. Green indicates the fixture has more than half a full charge, red indicates the battery power is getting low.



Instructions for Operation:

BANQUET
Auto Mode:

Use the menu, up and down buttons to scroll the menu until the display reads CC##, CP## or DE##

CC## = color changing
CP## = color change fade out
DE## = color change fade in

Once the display shows you the correct color changing mode, press enter to then adjust the speed of the mode from 0 - 100 using the up and down buttons. Press enter to confirm your selection.
BANQUET

On Board Mixology/Color Mixing

On board mixology is a feature that allows a fixture to create all the colors and shades that DMX control would allow without having to program a complicated controller and deal with cables. This feature lets you pick one of the 255 shades for each colored LED installed in the fixture (Red, Green, Blue, White or Amber). This is the same color mixing control you would get with an expensive DMX controller.

Using the mode, up, down and enter buttons, find the color mixing section of the fixture. The display will read:

R### any where from 0- 255 will control the red LEDs (0 being no color - 255 being the brightest shade)
G### any where from 0 - 255 will control the green LEDs (0 being no color - 255 being the brightest shade)
B### any where from 0 - 255 will control the blue LEDs (0 being no color - 255 being the brightest shade)
A### any where from 0 - 255 will control the amber LEDs (0 being no color - 255 being the brightest shade)
0### any where from 0 - 255 will control the white LEDs (0 being no color - 255 being the brightest shade)

***Some fixtures do not have white and/or amber or some of the color listed above, so it is important to read the descriptions before you buy to make sure you are getting a fixutre with the capabilites you want and require***

***Amber and white may have different designation so always test to make sure***




For Sound Active Mode:


Use the menu, up and down buttons to scroll the menu until the display reads BEBE. Press the enter button to confirm your selection.

BANQUET


For DMX Mode:

Use the menu, up and down buttons to scroll the menu until the display reads d###. Use the up and down buttons to select the desired DMX value.

Channel #1
    0-255  Master Dim (must be up for fixture to light up)
Channel #2
    0-255  Strobe (slow-fast)
Channel #3
    0-50  No function
    51-100  Auto mode #1
    101-150  Auto mode #2
    151-200  Auto mode #3
    201-255  Sound active mode
Channel #4
    0-255  Control the speed of auto modes (slow-fast)
Channel #5
    0-255  Controls the Red LEDs
Channel #6
    0-255  Controls the Green LEDs
Channel #7
    0-255  Controls the Blue LEDs
Channel #8
    0-255  Controls the White LEDs

How to use this light with the American DJ MyDMX software

BANQUET


Wireless DMX Mode:

This fixture can work as a transmitter and receiver for DMX signals. There are multiple ways this fixture can run wirelessly.

Wireless Master/Slave:

On top of the fixture there is a button marked switch. When you press the switch button it changes colors. These colors represent the frequencies the fixture connects on. There are 7 different colors/frequencies the Banquet can connect on. Once the same color/frequency is selected the switch light will the start blinking; Red if it's NOT connecting with another unit and Green if it IS connecting with another fixture. Once the swtich lights are set the same and blinking Green to indicate they are connected, set the master fixture to any auto or sound active mode. Set the slave fixtures to DMX value d001 and the slave will then mimic the master fixture.

Using the first fixture in your DMX chain as the transmitter:

Hook your DMX controller to the first fixture using a DMX cable. On the top of the fixture there is a button marked switch. When you press the switch button it changes color. These colors represent the frequencies the fixtures connect on. There are 7 different colors/frequencies the BANQUET can connect on. Once the same color/frequency is selected the switch light will start blinking; Red if it's NOT connecting with another fixture, Green if it IS connecting with another fixture. Once the switch lights are set the same and blinking green to show they are connected, all the fixtures can now be controlled by the DMX controller.

Using the Banquet with a DMX controller and REBEL Wireless Transmitter

Connect your DMX controller to the REBEL using a DMX cable. For instructional help click here .On top of the BANQUET fixture there is a button marked switch. When you press the switch button it changes color. These colors represent the frequencies the fixture connects on. There are 7 different colors/frequencies the Banquet can connect on. Once the same color/frequency is selceted, the switch light will then start blinking; Red if it's NOT connecting to another fixture, Green if is IS connecting with another fixture. Once the switch lights are set the same and blinking Green to show they are connected you must set the REBEL to the correct frequency. The switch color co-incides with a REBEL transmitting frequency. See chart below.

Switch Colors REBEL ID Frequency
Red
Green
Yellow
Blue
Purple
Cyan
White
1
2
3
4
5
6
7

The switch light will blink Green when everything is communicating correctly. You will then be able to control your BANQUETS with your DMX controller completely wireless.

For Master/Slave Mode:

Set the first fixture to any auto or sound feature. Then connect the second fixture using a DMX cable. Using the mode, up, down, and enter buttons below the LED display, press the buttons until D001 shows up on the display. The slave fixture will begin to mimic the master fixture.
PAYTON

Click Here To Purchase

Back

  2013 by Stage Ape Lighting