Stage Ape Lighting Stage Ape Lighting



.

.

.


Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage apeThe Ape CANTU... stage ape

Short, Silver LED PAR 64 Can with 177 10mm LED's and a 35 Beam Angle...


60 Red, 57 Green, 60 Blue. 

4 DMX channels: #1=on/off #2=Red #3=Green #4=Blue

Stand alone modes: auto, sound active, strobe, master/slave

Includes 3 amp short fuse, 100,000 hour LED’s. 12 watt power consumption.

Size 11" x 10" x 8.5" and weighs 3 Lbs

CANTU
stage ape Click Here To Purchasestage ape

Instructions for STAND ALONE operation:

**These LED lights can produce many different effects and colors without using a controller. Just use the dip switches on the rear of the light to mix the colors to produce brilliant shades of purple, pink, magenta and more. Each light has multiple  dip switches for each color. Make each color combinations your own to fit your event or show.**

CANTU
With dip switches #1 and #9 in the on/up position you can control the Red LED's
With dip switches #2 and #9 in the on/up position you can control the Green LED's
With dip switches #3 and #9 in the on/up position you can control the Blue LED's

With dip switches #4 and #9 in the on/up position this fixture will strobe. Use dip switches #1-#3 to control the speed (slow-fast).
With dip switches #5 and #9 in the on/up position this fixture will change colors. Use dip switches #1-#3 to control the speed (slow-fast).
With dip switches #6 and #9 in the on/up position this fixture will fade from one color to the next. Use dip switches #1-#3 to control the speed (slow-fast).
With dip switches #7 and #9 in the on/up position this fixture will strobe to sound.
With dip switches #8 and #9 in the on/up position this fixture will change color to sound. 
CANTU
DMX Mode:

To run this fixture in DMX mode you must have dip switch #10 in the on/up position. You must also set the DMX value by using dip switches #1through #9.

Channel #1    0-152 ON (this channel must be on for this fixture to work)
                    153-242 strobe (slow- fast)
                    243-255 ON
Channel #2   0-255 Controls the Red LED's
Channel #3   0-255 Controls the Green LED's
Channel #4   0-255 Controls the Blue LED's

How to use this light with the American DJ MyDMX software
CANTU


Master / Slave Mode:

Set the mast fixture to any sound active or auto mode function. Connect the master the the slave fixture using a DMX cable. Set the dip switches on all the slave units to show dip switch # 10 in the on /up position.

CANTU
Includes black power cord.
cord

Click Here To Purchase

Back


  2012 by Stage Ape Lighting