Stage Ape Lighting Stage Ape Lighting



.

.


Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
The Ape CHEETA...

**New & Hot** An ultra bright 300 mW (445nm) DMX blue laser.  

This laser has 148 different patterns and graphics (graphics include: eagle, snowman and women as well as sayings like hello, good luck and happy party) with multiple variations of each pattern. Modes include: DMX, Auto mode and Sound active with a built-in mic and sensitivity knob.This laser is best controlled in DMX mode. You have access all 148 patterns, and you can control and manipulate the patterns to create a pattern all your own. You can only utilize all the patterns and features using a DMX controller.

Input voltage: AC110-240v 50/60Hz
Power: 50W
Lifetime: 5000H

Comes with mounting bracket and power cord. Unit size is 9.5" x 9.5" x 4" and weighs 3 Lbs.

Download the instruction manual for the CHEETA sold PRIOR to Jan. 2012  HERE .

Download the instruction manual for the CHEETA sold AFTER to Jan. 2012  HERE .

Video For CHEETA sold AFTER January 2012:


CHEETA
stage ape Click Here To Purchase stage ape

Instructions for Operation:

Auto Mode:

Set the dip switches on the rear of the unit to show dip switch #1 in the ON position. The laser will scroll through some of it's pattern automatically.
CHEETA
Sound Active Mode:

Place ALL the dip switches in the OFF position to put this fixture into sound active mode.
CHEETA
DMX Mode:

Connect fixture using a DMX cable to your DMX chain. Set your DMX value in your chain using the dip switches on the rear of the unit. Make sure that dip switch #10 is on for the fixture to work in DMX mode.

Channel #1
    1-49  Puts the laser into sound active mode
    50-99  Puts the laser into PATTERN auto mode
    100-149  Puts the laser into GRAPHIC auto mode
    150-255  Pattern choose (must all the way up to access pattern on channel #3)

Channel #2
    1-15  OFF
    16-255  ON (must be ON to work laser)
CHEETA

CHEETA


Channel #3
    1-255  Patterns

**For a comprehensive list of patterns and their DMX values, download the instruction manual here.**

Channel #4
    1-190  Moves pattern down to up (slow-fast)
    191-255  Moves pattern up to down (slow-fast)

Channel #5
    1-190  Moves pattern from right to left (slow-fast)
    191-255  Moves pattern from left to right (slow-fast)

Channel #6
    1-255  Rotates pattern on the X axis (slow-fast)

CHEETA

Channel #7
    1-255  Rotate pattern on the Y axis (slow-fast)

Channel #8
    1-255  Rotate pattern in a circular motion (slow-fast)

Channel #9
    1-85  Pattern explodes (goes from small to large) (slow-fast)
    86-170  Pattern implodes (goes from large to small) (slow-fast)
    171-255  Pattern moves in and out (slow-fast)

Channel #10
    1-255  Pattern size (small- large)

Channel #11
    1-255  Puts patterns into dots

Channel #12
    1-255  Adjust scanning speed. Gives the patterns the appearance of strobing parts of the pattern.
CHEETA
Master/Slave Mode:

Connect the fixture you want to use master/slave via DMX cable. Set the master to sound or auto mode using the dip switches. On the slave fixture set the dip switch #10 to the on position. The fixtures should link up and do the same thing.

Includes black power cord.
127 London

Video For CHEETA sold PRIOR to January 2012:

 

Click Here To Purchase

Back

2011-2012 by Stage Ape Lighting