Stage Ape Lighting Stage Ape Lighting





stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage ape The Ape COASTER... stage ape
New & Hot!! RGB LED Moving Head Wash.

86 5mm LED’s (30 red, 28 green, 28 blue).

15 degree beam angle.

Modes include: DMX, sound active, auto mode and master/slave modes. 5 channel DMX.

30 watt power consumption. 350 degree pan and 260 degree tilt. Plug in and go.

These units work great in master/slave and with basic DMX controllers. These units are not made to work with DMX software.

Unit size 8.5" x 8.5" x 5.5" weight 5 Lbs

Download the instruction manual HERE.

stage ape Click Here To Purchase stage ape

Instructions for Operation:

Auto Mode:

   Put all dip switches in the off/up position. The light will begin to move and change on it's own.

Sound mode:
    With only dip switch #9 in the on/down position the light will change color and move to the beat.
DMX mode:

    If this is the first light in your DMX chain, just put dip switch #10 to the on/down position. For this light, dip switches 1-9 are reversed, meaning dip switch #9 has a value of 1 and dip switch #8 has a value of 2 and so on. Dip switch #1 has a value 256.

Channel #1 controls tilt
Channel #2 controls pan
Channel #3 controls colors
        0-34 off
        35-71 green
        72-107 red
        108-143 blue
        144-179 yellow
        180-215 aqua
        216-251 purple
        252-255 all LED's on
Channel #4 controls strobe 0-255 (fast-slow)

How to use this light with the American DJ MyDMX software
Master/Slave mode:

Set the first fixture to either sound active or auto mode. Then connect the second fixture using a DMX cable. On the second fixture set only dip switch #10 to the ON position. The  lights will link up and they will move and change together.
power cord

Click Here To Purchase


  2010 by Stage Ape Lighting