![]() |
![]() |
.
.
.
|
|
Lux Readings at 1 meter:Red 2,720 Blue 16,880 Green 10,040 All On 29,000 |
![]() |
Instructions for STAND ALONE operation:Auto Modes:Press the menu button until C 1,2,3 or 4 appears on the display. Press enter and a T### will appear. This setting allows you to adjust the speed of the color change or color fade. Use the up and down buttons to adjust the speed from fast to slow (0-255). Press enter to initiate the settings. C-1 color change C-2 color fade C-3 color change C-4 color fade | ![]() |
Sound Active Mode: Press the menu button until S.u.n.d appears on the display. Then press enter and the unit will the react to sound. Color Mixing: Press the menu button until R### , G### or B### appears. Use the up and down button to adjust the brightness of each color 0-255. 0 being off or nothing and 255 being 100% brightness. This will allow you to manually create almost any color with out the use of a controller. | ![]() |
For
DMX Mode: Press the menu button until d### appears on the display. Then use the up and down buttons to select the proper address according to your DMX chain. Channel #1 controls the master dimmer Channel #2 controls the red LED's Channel #3 controls the green LED's Channel #4 controls the blue LED's Channel #5 controls the strobe feature Channel #6 controls the color change feature How to use this light with the American DJ MyDMX software | ![]() |
For
MASTER / SLAVE Mode: Set the master fixture to any auto or sound active mode feature. Connect the master fixture to the slave units using a DMX cable. Set the slave fixtures to show d001 on the digital display using the menu, up and down buttons. The slave units will then do the same thing as the master unit. |