Stage Ape Lighting Stage Ape Lighting



.

.

.


Home
Controllers


stage ape
Ape CHASE-4...
4 Channel chasing light controller...

3 different chase options. The three position switch located on the front allows you to switch between 2 chase to speed options and a chase to audio using a built in mic.

This controller can handle 5 amps per channel and has a max load of 6.3 amps.

See Details     		CHASE-4
stage ape stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
Ape DMX 4WAY...

DMX FOUR WAY SPLITTER/AMPLIFIER...

1 DMX XLR input, 1 DMX XLR thru and four DMX XLR outputs.

3 pin DMX connectors for each individual channel.

Each output features an independent driver that boosts each output signal. Power out socket on rear.

See Details     		DMX 4WAY
stage ape stage ape


Ape Acrobat...
DMX Controller with 192 Channels...

Control up to 12 intelligent lights using up to 16 DMX channels per head. Max of 192 DMX channels. Use the 8 sliders to record 6 programmable chases with 240 scenes in a 30 bank memory. Built in mic.

See Details     		The Ape Acrobat
stage ape stage ape


Ape REBEL...
Wireless DMX512 Transmitter/Receiver...

Each unit can be used as a transmitter or receiver. Communication distance 450 ft. LCD display. 4 selectable transmitting power ratings. Max transmitting power 20dBm. Receive sensitive -94dBm. 16 Channel ID groups (16 individual wireless net groups that won’t interfere with each other in the same room).

See Details     		The Ape REBEL
stage ape stage ape


Ape WIDEFOOT...
4 Pedal foot controller for 114-WIDE64....

There are 4 pedals: One is Automatic Operation/Sound Active Operation; One is Dim; One is marked Freeze and can stop on a color after auto mode and can shuffle through 8 preset colors by taping the pedal; and the last is Blackout. Simply connect the 13' 11.5" DMX connector that comes attached to the footpad to the DMX input on the first 114-WIDE64 and set the light to slave mode (dip switch #10 only). If you want to control a series of lights, connect the lights by DMX cables together and set all lights to slave mode. All connected lights will do the same thing at the same time. **Works with WIDE64, BLAZER, STUD, and HAMPSTER.**

See Details     		The Ape WIDEFOOT
stage ape stage ape


Ape CONLEY...
DMX-512 dimming console...

24 sliders, 24 flash buttons, 24 DMX channels, 4 pages of 12 scenes for programs, mix and match chases, override chases on the fly, beat-activation- ( tap sync, auto run, midi), audio input, polarity selector, auto run, midi in/out and thru, blackout, 6 space 19" rack mount. 

See Details 		CONLEY
stage ape stage ape

Back