Stage Ape LightingStage Ape Lighting



.

.

.

Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage apeThe Ape EAGLE... stage ape
Compact and lightweight LED Powered DMX Moving Head! Compare to the Chauvet Minspot!

15 Watt RGB LED’s. Modes include: Sound active, auto mode, master/slave and DMX.

13 or 5 channel DMX operation. 540 degree pan and 270 degree tilt.

14 colors and 9 gobos + spot.

Power consumption 50w. Comes with power cord and mounting bracket.

Unit size 10.5" x 7" x 6" and weighs 6.6 Lbs.

Download the instruction manual HERE.


EAGLE
stage apeClick Here To Purchase stage ape

EAGLE EAGLE EAGLE EAGLE EAGLE EAGLE EAGLE EAGLE EAGLE
EAGLE

Instructions for Operation:

Auto and Sound Active Modes:

To chose modes, press the Esc button until it reads one of these: nSta, nStS, nStc or SLAv. Then press enter to initiate the setting.

nSta - auto mode slow (moves slowly while changing gobos)

nSts - sound active mode ( moves and changes with the beat of music)

nStc - auto mode 2 (quick movement while changing gobos)

SLAv - slave setting for master slave mode (see master/slave instructions)
 



EAGLE
DMX Mode:

Press Esc button until d001-d512 appears. Select your fixtures dmx address (ex. if it's your first fixture d001). You also have a choice of 5 channel or 13 channel DMX. Press the Esc button until it reads 5ch or 13ch. Press enter after choosing your desired channel selection.

5 channel mode:

Slider #1 Pan
Slider #2 Tilt
Slider #3 Master dim (must be up/on for colors and gobos to work)
Slider #4 Color
Slider #5 Gobo
EAGLE  EAGLE
13 channel mode:

Slider #1 Pan
Slider #2 Fine pan
Slider #3 Tilt
Slider #4 Fine tilt
Slider #5 Pan and tilt speed adjustment
Slider #6 Master dim (must be up/on for colors and gobos to work)
Slider #7 Red
Slider #8 Green
Slider #9 Blue
Slider #10 Preset colors
Slider #11 Color change 0-255 fast to slow
Slider #12 Sound active function 0-255 off to on
Slider #13 Gobo

How to use this light with the American DJ MyDMX software
EAGLE
Master/Slave Mode:

Set the first fixture to a sound active or auto function using the Esc and up/down buttons. Then connect the second fixture using a DMX cable. Set the second fixture to Slav (See the modes section above).
power cord

Click Here To Purchase

Back


  2010 by Stage Ape Lighting