Stage Ape LightingStage Ape Lighting



.

.

.

Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage apeThe Ape FABFOUR... stage ape
**SOLD AFTER JANUARY 2012**

Package with 4 Hi-Tech flat LED heads mounted on a T-Bar that houses the controller, a 4 button footswitch, tripod and carry case for the LED heads.

An all in one, 4 RGB can LED light system.

4 Lights each with 108 10mm LED’s.
432 LED’s total with a 30 Degree Beam angle

Total 144 Red, 144 Green, 144 Blue
36 Red, 36 Green, 36 Blue LED’s in each light

50 watt current draw, 100,000 hour LED’s. T-bar with lights size 52" x 12" x 3" and weighs 16 Lbs. Stand closed is 38" x 5" x 5" and weighs 6.5 Lbs. Stand fully extended is 9.5' tall. Foot switch controller is 20" x 6" x 2.5" and weighs 3.2 Lbs.

Download the instruction manual HERE.
FABFOUR
stage ape Click Here to Purchase
stage ape

Includes: 

4 Lights, Four pedal foot switch (auto run, sound active, freeze, blackout) with a 16 foot cord, 6 foot stand, T-bar that contains all the plugs for the lights and contains the controller with led display, Carrying case for T-bar and the 4 lights. Each light has an adjustable mounting bracket for independent mounting.

Features: 

Sound active with built in mic, 14 selectable preset programs, Auto-run (loops through built in programs), Master/slave, 7 different DMX modes for ultimate control. Change between auto run, sound active, freeze, blackout with foot switch controller.

Foot Controller:

Switch #1 Auto Mode- Puts the lights into auto fade program

Switch #2 Sound active- By pressing this it puts the light in to whichever sound active mode that you have set on the fixture itself (see sound active section of this page)

Switch #3 Freeze- Will freeze on which ever color the lights are on at that moment

Switch #4 Black out- Will go dark no matter which mode you are in

FABFOUR-F

Instructions for STAND ALONE operation:

Stand Alone Preset Modes: On the T-bar, underneath the led display are 4 button. Press the mode button until the led display reads Pr.05 (number may vary).

Pr.01- Is all LED’s on at full intensity (can be changed by pressing setup and up and down to select a color, 8 different preset colors)
PR.02- Is very slow fading color change (changes color fading in another color first)
PR.03- Is a medium speed fading color change (changes color fading in another color first)
PR.04- Is a very slow color change (fades a color in and out before moving on to the next color)
PR.05- Is a quick color change
PR.06- is a slow chasing color change (brings on light on at a time and moves back and forth)
PR.07- Is a medium speed chasing color change (brings on light on at a time and moves back and forth)
PR.08- Changes color while strobing
PR.09- Fast color change while chasing back and forth
PR.10- Slow color change ( 2 outside cans change first then the 2 inside cans change)
PR.11- Medium color change ( 2 outside cans change first then the 2 inside cans change)
PR.12- Quick color change (all cans changing at different times)
PR.13- Red LED’s stay on while green LED’s chase from left to right
PR.14- Red LED’s stay on while green LED’s chase from left to right and then back from right to left

FABFOUR-F
Auto mode: Press menu button until the led display reads auto. This feature will cycle through it’s modes until you turn it off.

Sound active mode: Press the menu button underneath the led display until it read SU.31 (number may vary). This will activate the built in mic and change colors to music. The  number controls how quickly the lights change color in sound active mode 0 being the slowest and 31 being the fastest.
FABFOUR-F
Master/Slave mode: Chose any stand alone function ( preset, auto, or sound active). Link the slave units by dmx cord. On the slave units press the menu button until the led display reads SLAv.
FABFOUR-F
DMX mode:

There are seven different DMX modes. Press the menu button until the led display reads d001. This is the digital dip switch setting for the first fixture. Then press the set up button. d-p1 will show on the led display (number may vary) Use the up and down to select the desired DMX mode 1 through 7. Because of the multiple channel settings, set your second fixtures digital dip switch to read d017 for easy fixture selection.

Mode 1: d-p1
Slider #1 is red LED intensity on all 4 cans
Slider #2 is green LED intensity on all 4 cans
Slider #3 is Blue LED intensity on all 4 cans

Mode 2: d-p2
Slider #1 is red LED intensity on all 4 cans
Slider #2 is green LED intensity on all 4 cans
Slider #3 is blue LED intensity on all 4 cans
Slider #4 is the master dimmer for all 4 cans (must be on or up for lights to work)

Mode 3: d-p3
Slider #1 is red LED intensity on the left 2 cans
Slider #2 is green LED intensity on the left 2 cans
Slider #3 is blue LED intensity on the left 2 cans
Slider #4 is red LED intensity on the right 2 cans
Slider #5 is green LED intensity on the right 2 cans
Slider #6 is blue LED intensity on the right 2 cans
Slider #7 is strobe 0-255 slow to fast
Slider #8 is the master dimmer for all cans (must be on or up for lights to work)
FABFOUR-F
Mode 4: d-p4
Slider #1 is red LED intensity on just the far left can
Slider #2 is green LED intensity on just the far left can
Slider #3 is blue LED intensity on just far the left can
Slider #4 is red LED intensity on just the 2nd can from the left
Slider #5 is green LED intensity on just the 2nd can from the left
Slider #6 is blue LED intensity on just the 2nd can from the left
Slider #7 is red LED intensity on just the 3rd can from the left
Slider #8 is green LED intensity on just the 3rd can from the left
Slider #9 is blue LED intensity on just the 3rd can from the left
Slider #10 is red LED intensity on just the 4th can
Slider #11 is green LED intensity on the 4th can
Slider #12 is blue LED intensity on the 4th can
Slider #13 is strobe 0-255 slow to fast
Slider #14 is the master dimmer for all cans (must be on or up for lights to work)

Mode 5: d-p5
Slider #1
    0-9 is off
    10-19 is red on all cans
    20-29 is yellow on all cans
    30-39 is green on all cans
    40-49 is cyan on all cans
    50-59 is blue on all cans
    60-69 is purple on all cans
    70-79 is white on all cans
    80-89 is preset program 1
    90-99 is preset program 2
    100-109 is preset program 3
    110-119 is preset program 4
    120-129 is preset program 5
    130-139 is preset program 6
    140-149 is preset program 7
    150-159 is preset program 8
    160-169 is preset program 9
    170-179 is preset program 10
    180-189 is preset program 11   
    190-199 is preset program 12
    200-209 is preset program 13
    210-219 is preset program 14
    220-229 is preset program 15
    230-239 is preset program 16
    240-255 is sound active mode
Slider # 2 is the speed of programs 0-255 slow to fast
FABFOUR-F
Mode 6: d-p6
Slider #1
    0-9 is off
    10-19 is red on all cans
    20-29 is yellow on all cans
    30-39 is green on all cans
    40-49 is cyan on all cans
    50-59 is blue on all cans
    60-69 is purple on all cans
    70-79 is white on all cans
    80-89 is preset program 1
    90-99 is preset program 2
    100-109 is preset program 3
    110-119 is preset program 4
    120-129 is preset program 5
    130-139 is preset program 6
    140-149 is preset program 7
    150-159 is preset program 8
    160-169 is preset program 9
    170-179 is preset program 10
    180-189 is preset program 11   
    190-199 is preset program 12
    200-209 is preset program 13
    210-219 is preset program 14
    220-229 is preset program 15
    230-239 is preset program 16
    240-255 is sound active mode
Slider #2 is the master dimmer for all cans (must be on or up for lights to work)
Slider #3 is strobe 0-255 slow to fast
Slider #4 is red LED intensity on just the far left can
Slider #5 is green LED intensity on just the far left can
Slider #6 is blue LED intensity on just far the left can
Slider #7 is red LED intensity on just the 2nd can from the left
Slider #8 is green LED intensity on just the 2nd can from the left
Slider #9 is blue LED intensity on just the 2nd can from the left
Slider #10 is red LED intensity on just the 3rd can from the left
Slider #11 is green LED intensity on just the 3rd can from the left
Slider #12 is blue LED intensity on just the 3rd can from the left
Slider #13 is red LED intensity on just the 4th can
Slider #14 is green LED intensity on the 4th can
Slider #15 is blue LED intensity on the 4th can

Mode 7: d-p7
Slider #1 is red LED intensity on all 4 cans
Slider #2 is green LED intensity on all 4 cans
Slider #3 is blue LED intensity on all 4 cans
Slider #4
    0-9 is off
    10-19 is red on all cans
    20-29 is yellow on all cans
    30-39 is green on all cans
    40-49 is cyan on all cans
    50-59 is blue on all cans
    60-69 is purple on all cans
    70-79 is white on all cans
    80-89 is preset program 1
    90-99 is preset program 2
    100-109 is preset program 3
    110-119 is preset program 4
    120-129 is preset program 5
    130-139 is preset program 6
    140-149 is preset program 7
    150-159 is preset program 8
    160-169 is preset program 9
    170-179 is preset program 10
    180-189 is preset program 11   
    190-199 is preset program 12
    200-209 is preset program 13
    210-219 is preset program 14
    220-229 is preset program 15
    230-255 is all cans all on
Slider #5 is speed of programs 0-255 slow to fast
Slider #6 is strobe 0-255 slow to fast
Slider #7 is the master dimmer for all 4 cans (must be on or up for lights to work)

How to use this light with the American DJ MyDMX software
power cord

Click Here To Purchase

Back


  © 2012 by Stage Ape Lighting