Stage Ape Lighting Stage Ape Lighting



.

.

.


Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage ape The Ape FREEDOM... stage ape

NEW BATTERY POWERED LED can!! Includes 120 volt power supply!

Short, Black LED PAR 38 Can with 6 (1 watt) LED's and a 35 Degree Beam Angle. Soft edge spot. This LED PAR can puts out 1,781 LUX at 1 meter. (A standard PAR 38 can with a 120 watt soft white bulb puts out 1,037 Lux at 1 meter).

This fixture recharges while it is plugged into the wall. On/off power switch on rear. Red/Green indicator light on rear shows the recharge status. Red means charging and green means it’s ready.

4 channel DMX: #1=on/off, dimmer and strobe, #2=Blue, #3=Red, #4=Green.

Stand alone mode features: Sound active with built-in mic, auto color change and master/slave mode. Color temp less than 6000k. Includes 1 amp short fuse, 100,000 hour LED’s.

Size: 4.75" x 4.75" x 3.5" and weighs 1.7 Lbs

Download the instruction manual HERE.

FREEDOM
stage ape Click Here To Purchase stage ape

Lux Readings at 1 meter:


Red                263
Green            461
Blue               921
All On         1,781

How To:

This fixture recharges while it is plugged into the wall. The on/off power switch is located on the rear of the unit. The Red/Green indicator light on rear shows the recharge status. Red means charging and green means it’s ready. It has a battery life of 5-7 hours with all 3 colors (6 LED's) at full intensity and 8-12 hours with only 1 color (only 2 LED's) at full intensity.







FREEDOM

Instructions for STAND ALONE operation:

**These LED lights can produce many different effects and colors without using a controller. Just use the dip switches on the rear of the light to mix the colors to produce brilliant shades of purple, pink, magenta and more. Each light has multiple  dip switches for each color. Make each color combinations your own to fit your event or show.**

With only switch#1 on (up), the Green LED's come on at approximately 20% brightness.

With only switch#2 on (up), the Green LED's come on at approximately 30% brightness.

With only switch#3 on (up), the Green LED's come on at approximately 40% brightness.

With only switch#1 & #2 on (up), the Green LED's come on at approximately 60% brightness.

With only switch#2 & #3 on (up), the Green LED's come on at approximately 80% brightness.

With only switch#1 & #2 & #3 on (up), the Green LED's come on at approximately 100% brightness.

With only switch#4 on (up), the Red LED's come on at approximately 20% brightness.

With only switch#5 on (up), the Red LED's come on at approximately 30% brightness.

With only switch#6 on (up), the Red LED's come on at approximately 40% brightness.

FREEDOM
With only switch#4 & #5 on (up), the Red LED's come on at approximately 60% brightness.

With only switch#5 & #6 on (up), the Red LED's come on at approximately 80% brightness.

With only switch#4 & #5 & #6 on (up), the Red LED's come on at approximately 100% brightness.

With only switch#7 on (up), the Blue LED's come on at approximately 35% brightness.

With only switch#8 on (up), the Blue LED's come on at approximately 65% brightness.

With only switch#7 & #8 on (up), the Blue LED's come on at approximately 100% brightness.

With only switch#9 & #2 on (up), the light strobes with Red, Blue and Green LED's on. Use dip switches #4,5,6,7,8 to control the speed of strobe.

With only switch#9 & #3 on (up), the changes color the sound.
FREEDOM

DMX mode:


Dip switch #10 must be on for DMX mode to work.

Slider #1- 0-127 Brightness, low to high (controls overall brightness).
                128-249 Strobe from slow to fast
                250-255 On
Slider #2- Brightness of the Blue LED’s
Slider #3- Brightness of the Red LED’s
Slider #4- Brightness of the Green LED’s

How to use this light with the American DJ MyDMX software
FREEDOM

Master/Slave:


Set dip switches #1-8 on the master fixture to the desired numerical value. Connect the second fixture by DMX cord.
Then set dip switch #10 of the slave fixture to the "On" position.

cord

Click Here To Purchase

Back


  2010 by Stage Ape Lighting