Stage Ape Lighting Stage Ape Lighting





stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage ape The Ape FS575DMX... stage ape

DMX followspot with SUPER BRIGHT HMI-575 Bulb...

4 channel DMX operation. Seven dichroic colors plus white are; red, green, blue, yellow, purple, white, and open. Strobing, Color temperature control, Motorized color wheel, iris, shutter and strobe wheel, control panel included, Programmable via any DMX-512 controller; The high quality iris maintains a nearly perfect circle. Other follow spots in this price range usually use a shutter that distorts the shape of the beam. Adjustable focus. 

DMX in & out , HMI-575 bulb and adjustable tripod included. Beam diameter at 100 ft. is 15.0 in. to 15.5 ft. These measurements are approximate, your results may vary.

Size- 44" l x 16" w x 9" h. Weight- 72 Lbs.

stage ape **SOLD PRIOR TO OCTOBER 2010** stage ape

Instructions for operation:

Start up:

Check dip switches make sure all are in the off position.
Make sure the on/off switch on the controller is in the on position.
Check to make sure the cable coming out of the controller is connected to the signal in connection on the light.


The switch in the top left marked NONE, RISE and FALL. These button controls the shade of white to make it look like sun rise and sun set and then plain white.

There are 3 sliders marked STROBE, APERTURE and COLOR.

Strobe- When this slider is all the way to the left it closes the shutter. To open it up the shutter bring the slider a 1/4 of the way to the right. after a 1/4 of the way the light strobes from slow to fast.

Aperture- This slider controls the size of the beam. from left to right (small to large)

Color- This slider will scroll through the colors and past half way the light will begin to a constant scroll.

There are 8 buttons at the bottom of the controller. 6 colors these will automatically scroll to that color. The two marked open and close are the shutter. press open to bring the light on and press close to black it out.

***Pressing close does not turn the bulb off***

Make sure dip switch 10 is in the ON position. Connect the light to the board via DMX cable. This is a four channel DMX light.

Channel #1 0-75 On
         76-255 Strobe fast to slow
Channel #2 0-255 Aperture small to large
Channel #3 0-35 No change in shade of white
         36-71 Rise (give white a tint that resembles a sun rise)
         72-255 Fall (give white a tint that resembles a sun set)
Channel #4 Colors

Includes attached black power cord. CORD


  2009 by Stage Ape Lighting