Stage Ape Lighting Stage Ape Lighting



.

.


Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage ape The Ape GOBOSPOT... stage ape

This professional gobo projector uses a 24v 250 watt EVC bulb.

4 colors (red, blue, green, yellow). Without a gobo installed, this light can be used as a 4 color spotlight to aim at a mirror ball, wall or dance floor. You can stop on a color with the flick of a switch. Focusable front lens.

Gobo size is 48 mm (gobo not included). The gobo is placed in it’s holder, directly in front of the bulb and held in place with a retaining ring. Gobo can rotate. The image size can be up to 40mm on the gobo. The most popular image size is 39mm.

One EVC bulb and power cord included.

Unit size 12" x 11" x 6" and weighs 14 Lbs.

Download the instruction manual HERE.

GOBOSPOT
stage ape Click Here To Purchase stage ape

Instructions for Operation:

GOBOSPOT

Switch #1 controls the 4 color gobo wheel.

4 colors rotate around. Flick the switch to stop the color wheel at anytime.

Switch #2 controls the gobo wheel. Flick the switch to begin rotate your custom made gobo. 		GOBOSPOT
GOBOSPOT


To Change the Gobo:

To get to the gobo holder, you must unscrew the thumb screw on the bottom of the fixture.

After the thumb screw is removed, pull the plate off exposing the inside of the fixture. 		GOBOSPOT

The below ring is installed inside the light at time of purchase. Remove the ring before inserting gobo. The gobo should be installed by the lens closest to the bulb. You will notice a lip of the inside and the retaining ring holds the gobo in there.

GOBOSPOT
GOBOSPOT
Insert gobo and then retaining ring. Then close up the light. GOBOSPOT
Includes black power cord. cord

Click Here To Purchase

Back

© 2009 by Stage Ape Lighting