Stage Ape Lighting Stage Ape Lighting



.

.

.


Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage ape The Ape PAR 38 HAMPSTER... stage ape
Short, Black LED PAR 38 Can with 86 5mm LED's and a 35 Degree Beam Angle...

44 red, 21 green, 21 blue LED’s.

Soft edge spot. Built in mic.

7 channel DMX

Stand alone modes features: Sound active with built in mic, auto color change and master/slave mode.

Color temp less than 6000k. Includes 1 amp short fuse, 100,000 hour LED’s. Under 13 watt current draw.

This LED PAR can puts out 1,128 LUX at 1 meter. (A standard PAR 38 can with a 120 watt soft white bulb puts out 1,037 Lux at 1 meter).

Size 4.75" x 4.75" x 3.5" and weighs 1.7Lbs

HAMPSTER
stage ape Click Here To Purchase stage ape

Lux Readings at 1 meter:


Red                106
Green            526
Blue               836
All On         1,128

Instructions for STAND ALONE operation:

**These LED lights can produce many different effects and colors without using a controller. Just use the dip switches on the rear of the light to mix the colors to produce brilliant shades of purple, pink, magenta and more. Each light has multiple  dip switches for each color. Make each color combinations your own to fit your event or show.**

With only switch#1 on (up), the 55 Green led's come on at approximately 20% brightness.

With only switch#2 on (up), the 55 Green led's come on at approximately 30% brightness.

With only switch#3 on (up), the 55 Green led's come on at approximately 40% brightness.

With only switch#1 & #2 on (up), the 55 Green led's come on at approximately 60% brightness.

With only switch#2 & #3 on (up), the 55 Green led's come on at approximately 80% brightness.

With only switch#1 & #2 & #3 on (up), the 55 Green led's come on at approximately 100% brightness.
HAMPSTER

With only switch#4 on (up), the 52 Blue led's come on at approximately 20% brightness.

With only switch#5 on (up), the 52 Blue led's come on at approximately 30% brightness.

With only switch#6 on (up), the 52 Blue led's come on at approximately 40% brightness.

With only switch#4 & #5 on (up), the 52 Blue led's come on at approximately 60% brightness.

With only switch#5 & #6 on (up), the 52 Blue led's come on at approximately 80% brightness.

With only switch#4 & #5 & #6 on (up), the 52 Blue led's come on at approximately 100% brightness.

With only switch#7 on (up), the 44 Red led's come on at approximately 35% brightness.

With only switch#8 on (up), the 44 Red led's come on at approximately 65% brightness.

With only switch#7 & #8 on (up), the 44 Red led's come on at approximately 100% brightness.
HAMPSTER

With only switch#9 & #1 on (up), full brightness, fast color change.

With only switch#9 & #2 on (up), full brightness, medium speed color change.

With only switch#9 & #3 on (up), full brightness, slow color change.

With only switch#9 & #4 on (up), full brightness, fast color change. (Slightly different from #9 & #1)

With only switch#9 & #5 on (up), full brightness, medium color change. (Slightly different from #9 & #2)

With only switch#9 & #6 on (up), full brightness, slow color change. (Slightly different from #9 & #3)

With only switch#9 & #7 on (up), full brightness, fast color change. (Slightly different from above)

With only switch#9 & #8 on (up), full brightness, fast strobe.

With only switch#9 & #1 & #2 on (up), full brightness, slow color change. (Slower than above)

With only switch#9 & #1 & #2 & #3 on (up), full brightness, very slow color change. (Slower than above)

With only switch#9 & #1 & #2 & #3 & #4 on (up), full brightness, very, very slow color change. (Slower than above)

With only switch#9 & #1 & #2 & #3 & #4 & #5 & #6 & #7 & #8 on (up), flashes on and off and changes color to sound.
HAMPSTER

DMX mode:

The HAMPSTER is a 7 channel dmx light so you start DMX value 1. Set dip switches #1 & # 10 on the first fixture to the on position. Dip switch 10 is on to tell the light it is in DMX mode and does not have a value.

Slider #1 controls the green LED's

Slider #2 controls the red LED's

Slider #3 controls the blue LED's

Slider #4    0-16 white (red, blue and green LED's on)
                  17-31- red
                  32-47- purple
                  48-63- blue
                  64-79- aqua
                  80-95- green
                  96-120- light green
                  121-255- color change (set speed of color change with slider #5)

Slider #5    0-255 slow to fast color change (when slider #4 is set to 121-255)

Slider #6     0-127- strobe (from slow to fast)
                   128- 131- solid on
                   132-191- strobe fade in (fades from zero to full brightness)
                   192-240- fade (lights up and fades out)      
                   241-255- solid on

Slider #7 Dimmer (slider must be all the way up for the functions to work)

On the first fixture set dip switch #1 and #10 to the ON position. For easy use with our ACROBAT, set the second fixtures dip switch #1 and #5 and dip #10 to the ON position and that will give you control of the light using the #2 fixture/scanner button on the DMX controller. To run the lights all at once just set all the lights dip switches to #1 and #10 to the ON position.

How to use this light with the American DJ MyDMX software
HAMPSTER

Master/Slave:


Set the MASTER can on any of the STAND ALONE settings above and then connect up to 128 additional cans with DMX linking cables and set all SLAVE cans to have only dip switch #10 on (up). In this configuration, all cans will do the same thing at the same time.

CORD

Click Here To Purchase

Back


  2011 by Stage Ape Lighting