Stage Ape LightingStage Ape Lighting



.

.

.

Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage apeThe Ape LEDGE... stage ape
Single 24 watt LED DMX scanner. ...

4 DMX channels.

8 gobos each with set colors, plus a white open spot. LED display for settings.

Unit size 17" x 6.5" x 6" and weighs 14 Lbs

Modes: DMX, sound active, slow running, fast running and master/slave.

Download the instruction manual HERE.


LEDGE
stage apeClick Here To Purchase stage ape

Instructions for Operation:

Gobos and Colors:

Orange - Angel
Green - Biohazard   
Green - Flower
Purple - Rose
Light Blue - Spiral   
Yellow - Squares
Red - Stars
Dark Blue - Triangle
White - Circle

 LEDGE LEDGE LEDGE
LEDGE LEDGE LEDGE
LEDGE LEDGE LEDGE    

LEDGE

DMX Mode:


Set the digital dip to read A001 for the first fixture. These are 4 channel lights so set the second fixture to read A005. Go up in 4 for each of your next fixtures.

Channel #1 Pan on X axis

Channel #2 Tilt on Y axis

Channel #3 Gobo selection

          0-5 Closed
          6-11 Open
        12-17 Gobo #1
        18-23 Gobo #2
        24-29 Gobo #3
        30-35 Gobo #4
        36-41 Gobo #5
        42-47 Gobo #6
        48-53 Gobo #7
        54-59 Gobo #8
LEDGE
        60-65 Gobo #1 and #2 change
        66-71 Gobo #2 and #3 change
        72-77 Gobo #3 and #4 change
        78-83 Gobo #4 and #5 change
        84-89 Gobo #5 and #6 change
        90-95 Gobo #6 and #7 change
        96-101 Gobo #7 and #8 change
      102-171 Gobo wheel rotation (fast-slow)
      172-251 Open flash (slow-fast)
      252-255 Open

Channel #4   Lamp
          0-7 Off
          8-247 On (must be on for light to work)
      248-255 Reset

How to use this light with the American DJ MyDMX software
LEDGE
Stand Alone:

For sound active mode set the digital display to show (G-1-)
For slow running mode set the digital display to show (G-2-)
For fast running mode set the digital display to show (G-3-)
Set the digital display to (G-4-) for black out. (the light goes dark but the scanner is still on. Use this so the light doesn’t have to go through it’s boot up phase).
LEDGE
Master Slave:

Set the digital display on the first (master) fixture to any stand alone mode (G-1-, G-2-, G-3-). Link  all the fixtures together by dmx cords. Then set the digital display on the 2nd fixture to read (S-1-). If you want every fixture doing the exact same thing, set all other slaves to read (S-1-) on the digital display. Another feature of master/slave mode is to have the mirror on the scanners sync up and move together as well as move separate ways, while the colors remain the same. This mode works in groups of 4 scanners. Again set the digital display on the first (master) fixture to any stand alone mode (G-1-, G-2-, G-3-). Then set the first slave to read (S-2-), the third to (S-3-), and the fourth to (S-4-)
cord

Click Here To Purchase

Back


  2012 by Stage Ape Lighting