Stage Ape Lighting Stage Ape Lighting



.

.

.


Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage ape The Ape LED-OUTDOOR6... stage ape
Short, Black LED PAR 38 Can with six 1 watt LED's and a 45 Degree Beam Angle.

Has 2 red, 2 green, 2 blue LED’s. This is a soft edge spot with a built in mic. Waterproof connections for power and DMX.

Features include auto mode, DMX, master/slave, sound active and strobing modes. 4 channel DMX. Power linking capable.

Power cord and linking cables sold separately in various lengths.
DMX adaptor cable and dmx linking cables sold separately and are available in different lengths.

Power consumption 10 watts. Unit size  4.5" x 4.5" x 3.75" and weighs 3 Lbs.

These outdoor fixtures have an IP65 outdoor rating, which means they will stand up to dust and water from every direction. This fixture cannot be submerged under water.

**For outdoor use, remember to replace the cover over the dip switch area**

View power cords, linking cables and DMX adaptor cable Here.

Download the instruction manual HERE.

LED-OUTDOOR6
stage ape Click Here To Purchase stage ape

Instructions for Operation:

Auto mode:

**These LED lights can produce many different effects and colors without using a controller. Just use the dip switches on the rear of the light to mix the colors to produce brilliant shades of purple, pink, magenta and more. Each light has multiple  dip switches for each color. Make each color combinations your own to fit your event or show.**

On the rear of the unit, there are switches encased by a cover and a piece of rubber held on by two screws. These cover the dip switches that control the light. Unscrew and adjust these switches to utilize all of this lights settings.

With only switch#1 on (up), the Green LED's come on at approximately 20% brightness.

With only switch#2 on (up), the Green LED's come on at approximately 30% brightness.

With only switch#3 on (up), the Green LED's come on at approximately 40% brightness.

With only switch#1 & #2 on (up), the Green LED's come on at approximately 60% brightness.

With only switch#2 & #3 on (up), the Green LED's come on at approximately 80% brightness.

With only switch#1 & #2 & #3 on (up), the Green LED's come on at approximately 100% brightness.
LED-OUTDOOR6
With only switch#4 on (up), the Red LED's come on at approximately 20% brightness.

With only switch#5 on (up), the Red LED's come on at approximately 30% brightness.

With only switch#6 on (up), the Red LED's come on at approximately 40% brightness.

With only switch#4 & #5 on (up), the Red LED's come on at approximately 60% brightness.

With only switch#5 & #6 on (up), the Red LED's come on at approximately 80% brightness.

With only switch#4 & #5 & #6 on (up), the Red LED's come on at approximately 100% brightness.

With only switch#7 on (up), the Blue LED's come on at approximately 35% brightness.

With only switch#8 on (up), the Blue LED's come on at approximately 65% brightness.

With only switch#7 & #8 on (up), the Blue LED's come on at approximately 100% brightness.

With only dip switch #9 on (up), the light fades through the colors.

With only switch#9 & #2 on (up), the light strobes with Red, Blue and Green LED's on.

With only switch#9 & #3 on (up), the light changes color to sound.
LED-OUTDOOR6

DMX mode:

This fixture requires special waterproof connecting DMX cords. They come in multiple lengths. Set the dip switches to your desired numerical value and replace the cover. Dip switch #10 must be on for DMX mode to work.

Slider #1- 0-127 Brightness, low to high (controls overall brightness).
                128-249 Strobe from slow to fast
                250-255 On
Slider #2- Brightness of the Blue LED’s
Slider #3- Brightness of the Red LED’s
Slider #4- Brightness of the Green LED’s

Master/slave Mode:


Set dip switches #1-8 on the master fixture to the desired numerical value. Connect the second fixture by DMX cord.
Then set dip switch #10 of the slave fixture to the "On" position. 
LED-OUTDOOR6

Click Here To Purchase

Back


  2010 by Stage Ape Lighting