Stage Ape Lighting Stage Ape Lighting



.

.

.


Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage apeThe Ape PAYTON... stage ape
WIDE FLOOD RGBW LED PAR can with 7 x 12 watt 4 in 1 LED's...

This fixture utilizes full on board mixology. This mixology feature gives you the same color mixing control as a DMX controller. This fixture has a huge coverage area with great color mixing in a compact unit.

Features include: DMX, sound active, master/slave and 3 different color changing modes. 8 channel DMX.

60 watt power consumption. Color temp less than 6000k.

Unit size 8" x 7" x 5.5" and weighs 3 Lbs.


PAYTON
stage ape Click Here To Purchase stage ape

Instructions for STAND ALONE Operation:

PAYTON
Full On-Board Color Mixing:

This fixture allows you to create all the same colors in the color spectrum as you would with a DMX controller.

Use the menu button until you see:

r###=red LED's
G###=green LED's
b###=blue LED's
o###=White LED's


Each color can be adjusted from 0-255 by using the up and down button. This will allow you to create almost an infinite amount of colors.
PAYTON

Auto Modes:

Use the menu button on the rear until you see CC##, CP## or DE##. These are the 3 auto modes this fixture has.

The first (CC##) is a color change mode that just changes color without fading in or out. You can use the up and down buttons to select the speed of the color change from 1-99 (slow-fast).

The second (CP##) is color changing mode that fades out with the next color. You can use the up and down buttons to select the speed of the color change from 1-99 (slow-fast).

The second (dE##) is color changing mode that fades in with the next color. You can use the up and down buttons to select the speed of the color change from 1-99 (slow-fast).


For Sound Active Mode:

Use the Menu button until bEbE shows up on the rear display. This will automatically put the fixture into sound active mode.

PAYTON
For DMX Mode:

Use the menu button on the rear of the unit until d### appears. Set the fixture to your DMX value in your chain. If it is the first fixture in your chain the DMX value would be d001. Dmx value go up by the number of channels the fixture has, so in this case the next value would be 9. Connect the fixture using a DMX cable to you controller.

Channel #1 0-255 master dim
Channel #2 0-255 strobe (slow-fast)
Channel #3 0-50 no function
                   51-100 auto effect #1
                   101-150 auto effect #2
                   151-200 auto effect #3
                   201-255 sound active
Channel #4 0-255 speed control
Channel #5 0-255 controls the red LED's
Channel #6 0-255 controls the green LED's
Channel #7 0-255 controls the blue LED's
Channel #8 0-255 controls the white LED's

How to use this light with the American DJ MyDMX software

PAYTON
For MASTER / SLAVE Mode:

Set the master fixture to any color, auto or sound active mode. Connect the slave fixture to the master fixture using a DMX cable. Set the slave fixture to show D001 on the display using the menu, up and down button on the rear.
PAYTON

Click Here To Purchase

Back

  2013 by Stage Ape Lighting