Stage Ape Lighting Stage Ape Lighting



.

.

.

Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage ape The Ape PHOENIX... stage ape

DMX flat mirror scanner with a bright, 250 watt, ELC bulb, and a new black covering...

4 DMX channels.

8 gobos with set colors plus open.  24 volt 250 watt ELC bulb. 300 watt power consumption.

Unit size 17" x 6.5" x 6" and weighs 14.8 Lbs

Modes: DMX, sound active, slow running, fast running and master slave.

Download the instruction manual HERE.



PHOENIX
stage ape Click Here To Purchase stage ape

Instructions for Operation:

Gobos and Colors:

Green - Recycling symbol
Red - Spiral   
Light blue - Fat swirl
Light green - Dots
Orange - Sliced Pie   
Pink - Arrow
Blue - Hand
Red - Swirl
White - Circle

 phoenix phoenix phoenix.\ phoenix phoenix phoenix phoenix phoenix phoenix    

 PHOENIX

DMX Mode:

Set the digital dip to read A001 for the first fixture. These are 4 channel lights so set the second fixture to read A005. Go up in 4 for each of your next fixtures.

Channel #1 = Controls Gobos

   0-5 = Lamp off
   6-11= Lamp on
   12-17= Gobo 1
   18-23= Gobo 2
   24-29= Gobo 3
   30-35= Gobo 4
   36-41= Gobo 5
   42-47= Gobo 6
   48-53= Gobo 7
   54-59= Gobo 8
   60-65= Gobo 1 and 2 switch back and forth
   66-71= Gobo 2 and 3 switch back and forth
   72-77= Gobo 3 and 4 switch back and forth
   78-83= Gobo 4 and 5 switch back and forth
   84-89= Gobo 5 and 6 switch back and forth
   90-95= Gobo 6 and 7 switch back and forth
   96-101= Gobo 7 and 8 switch back and forth
   102-171= Gobo wheel rotate fast to slow
   172-251= Strobe slow to fast
   252-255 = Open

 PHOENIX
Channel #2 = Pan

Channel #3 = Tilt

Channel #4 = Light control
   0-7= Lamp off
   8-79= Lamp on
   80-255 = Auto mode changes mirror position every 5 seconds

How to use this light with the American DJ MyDMX software
 PHOENIX
Stand Alone:

For sound active mode set the digital display to show (G-1-)
For slow running mode set the digital display to show (G-2-)
For fast running mode set the digital display to show (G-3-)
Set the digital display to (G-4-) for black out. (the light goes dark but the scanner is still on. Use this so the light doesn’t have to go through it’s boot up phase).
 PHOENIX
Master Slave:

Set the digital display on the first (master) fixture to any stand alone mode (G-1-, G-2-, G-3-). Link  all the fixtures together by dmx cords. Then set the digital display on the 2nd fixture to read (S-1-). If you want every fixture doing the exact same thing, set all other slaves to read (S-1-) on the digital display. Another feature of master/slave mode is to have the mirror on the scanners sync up and move together as well as move separate ways, while the colors remain the same. This mode works in groups of 4 scanners. Again set the digital display on the first (master) fixture to any stand alone mode (G-1-, G-2-, G-3-). Then set the first slave to read (S-2-), the third to (S-3-), and the fourth to (S-4-)
 PHOENIX
Includes black power cord. cord
For information on the version of the PHOENIX sold PRIOR to September 2010, Click Here.  PHOENIX - OLD Version

Click Here To Purchase

Back


  © 2010 by Stage Ape Lighting