![]() | ![]() |
.
.
.

|
|
Instructions for operation:Auto and Sound Modes:Press the mode button until A# appears on the LED display. A1- RED LED’s on A2- GREEN LED’s on A3- BLUE LED’s on A4- RGB color change A5- RGB color mix A6- RGB color fade in/out A7- RGB strobing A8- Mix of all modes S1- Strobe to sound S2- Color change and strobe to sound After you have found the correct mode use the up and down buttons to select the rotation speed from 1-9. | ![]() |
| DMX Mode: Press the mode button until the LED display reads A###. Then press the up and down buttons to set the fixture's DMX value. Channel 1 0-249 Strobe (0-183 is slow to fast and 184-249 is slow to fast), 250-255 ON Channel 2 0-255 controls RED LED's Channel 3 0-255 controls GREEN LED's Channel 4 0-255 controls BLUE LED's Channel 5 0-255 controls the speed of the rotation (slow to fast) Channel 6 0-37 RED LED's (at medium rotation speed) 38-65 GREEN LED's (at medium rotation speed) 66-93 BLUE LED's (at medium rotation speed) 94-121 cycles through red, green and blue LED's with only 1 color on at a time (at medium rotation speed) 122-150 cycles through combinations of red, green and blue (at medium rotation speed) 151-177 cycles through RGB combinations fading in and out (at medium rotation speed) 178-210 fast strobe through color combinations (at medium rotation speed) 211-233 cycles through combinations of RGB witch some fast strobing (different than above, at medium rotation speed, looks like it could be an auto mode) 234-255 Nothing | ![]() |
| Master/Slave Mode: Set the first fixture to any auto or sound active mode. Connect the second fixture to the first using a DMX cable. Use the mode button to set the second fixture to DMX mode A001. The units will then start doing the same thing. | ![]() |
![]() | ![]() |
| Includes black power cord. |