Stage Ape Lighting Stage Ape Lighting



.

.

.

Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage ape The Ape RABBIT... stage ape
This product is DISCONTINUED. There are no more in stock and none available. This info is here for customers that purchased this item in the past and need details or instructions.

DMX moving head with one ultrabright 30 watt LED.

7 colors + white. 6 gobos + white. Modes include: auto-mode, sound active, strobe and DMX mode.

12 channel DMX. Gobo rotation and controllable rotation speed.

Maximum pan rotation 540 degrees. Maximum tilt rotation 255 degrees. 

Power consumption 54w. 2 amp fuse.

Unit size 15" x 11" x 10" and weighs 17 lbs.

Download the instruction manual HERE.

RABBIT
stage ape **Sold Prior to February 2012** stage ape

RABBIT RABBIT RABBIT RABBIT RABBIT
RABBIT

Instructions for Operation:

Auto Mode:

Use the mode button to scroll through the modes. For auto mode  keep pressing the mode button until one of the four settings (Colo=color, Gobo=gobo, Self=gobo auto rotation and Shy=x,y movement)is displayed. Press func button to enter settings mode. You must set each one of these four settings to your desired settings for this light to work best in auto mode. When you find to your desired setting make sure to press the func button to initialize your setting. There is an indicator light at the bottom right of the display screen, it will stop blinking when mode is set. If you do not hit the func button the light will default to its last setting.


Sound mode:
    Use the mode button to scroll through the modes until the display reads Soud. Press the func button to initialize sound active mode.
RABBIT RABBIT
DMX mode:

    Use the mode button to scroll through the modes until you reach 512 on the display. Press the func button to enter DMX addressing mode. Use the up and down buttons to select the lights address, then press the func button again to lock it in.

Channel #1 0-7 Off
                8-231 Strobe fast to slow
                232-255 On
Channel #2 0-255 Dimming (must be on/up for the light to come on
Channel #3 0-255 Controls movement on X-axis 450 degrees
Channel #4 0-255 Controls movement on Y-axis 270 degrees
Channel #5 0-255 X-axis adjust (small movement)
Channel #6 0-255 Y-axis adjust (small movement)
Channel #7 0-8 Nothing
                9-255 X,Y movement speed from fast to slow
Channel #8 0-255 Color
Channel #9 0-255 Gobo
Channel #10 0-255 Gobo adjust (rotates gobo in a single rotation)
Channel #11 0-119 Gobo rotation counter-clockwise from fast to slow
               120-255 Gobo rotation clockwise from slow to fast
Channel #12 0-79 Nothing
                80-199 Auto mode (changes every 3 seconds)
                200-245 Auto mode freeze
                246-255 Will revert back to original setting


How to use this light with the American DJ MyDMX software
RABBIT   RABBIT
Master/slave mode:  

    Use the mode button to scroll through the modes until you reach 512 on the display. Press the func button to enter DMX addressing mode. Use the up and down buttons to select the light's address  to A001 for all slave lights. Then press the func button again to lock it in. Connect the lights with DMX cables. On the Master fixture, pick a stand alone feature. The lights will then move at once.

RABBIT RABBIT

power cord

Back


  2010 by Stage Ape Lighting