![]() |
![]() |
.
.
|
|
Instructions for Operation:Auto Mode: Set the dip switches on the rear of the unit to show dip switch #1 in the ON position. The laser will scroll through some of it's pattern automatically. |
![]() |
Sound Active Mode:
Place ALL the dip switches in the OFF position to put this fixture into sound active mode. |
![]() |
DMX Mode:
Connect fixture using a DMX cable to your DMX chain. Set your DMX value in your chain using the dip switches on the rear of the unit. Make sure that dip switch #10 is on for the fixture to work in DMX mode. Channel #1 1-49 Put the laser into sound active mode 50-99 Puts the laser into PATTERN auto mode 100-149 Puts the laser into GRAPHIC auto mode 150-255 Pattern choose (must all the way up to access pattern on channel #3) Channel #2 1-5 OFF 6-10 White 11-15 Red 16-20 Yellow (red-green) 21-25 Green 26-30 Neon Blue (blue-green) 31-35 Purple 36-40 Pink 41-109 Color change (slow to fast) 110-180 Sectional color change (slow to fast) 181-250 Multi-color moving (slow to fast) 251-255 Rainbow |
![]() |
Channel #3 1-255 Patterns **For a comprehensive list of patterns and their DMX values, download the instruction manual here .** Channel #4 1-191 Moves pattern up to down (slow-fast) 192-255 Moves pattern down to up (slow-fast) Channel #5 1-191 Moves pattern from right to left (slow-fast) 192-255 Moves pattern from left to right (slow-fast) Channel #6 1-255 Rotate pattern on the X axis (slow-fast) |
![]() |
Channel #7 1-255 Rotate pattern on the Y axis (slow-fast) Channel#8 1-191 Rotate pattern in a counter-clockwise motion (slow-fast) 192-255 Rotate pattern in a clockwise motion (slow-fast) Channel #9 1-85 Pattern explodes (goes from small to large) (slow-fast) 86-170 Pattern implodes (goes from large to small) (slow-fast) 171-255 Pattern moves in and out (slow-fast) Channel #10 1-255 Pattern size (small- large) Channel #11 1-255 Puts patterns into dots Channel #12 1-255 Adjust scanning speed. Gives the patterns the appearance of strobing parts of the pattern. Channel #13 1-255 Does Nothing |
![]() |
Master/Slave Mode:
Connect the fixture you want to use master/slave using a DMX cable. Set the master to sound or auto mode using the dip switches. On the slave fixture, set the dip switch #10 to the ON position. The fixtures should link up and do the same thing. Includes black power cord. |
|