|
|
.
.
.
|
|
Lux Readings at 1 meter:Red 318 Green 496 Blue 490 All On 1,549 |  |
Instructions for STAND ALONE operation:Using the mode button and the up/down buttons on the rear of the unit to scroll through the features of this light. Scroll through using the mode button until you reach PR## or 1 of these four letters (R,G,B,U). Use these letters for stand alone color mixing. The PR## are for preset programs. You must press the enter button to initiate the program.R controls the stand alone brightness of the red LED's from 0-255 G controls the stand alone brightness of the green LED's from 0-255 B controls the stand alone brightness of the blue LED's from 0-255 U controls the stand alone brightness of the amber LED's from 0-255 PR01 Flashes all LED's on at full intensity to sound PR02 All LED's at full intensity flashes multiple times to sound PR03 All LED's fade in and out quickly to sound PR04-PR08 Fade in and out in different color combinations. The speed of the fade is controllable. See Speed option below. PR09 Is a RGBA color change. The speed is controllable. See Speed option below. PR10-12 Color change. The speed of the color change is controllable. See speed option below. PR13 Is a RGB color change. The speed is controllable. See Speed option below. |
 |
| Speed
Control: Use the mode button until the display reads S9##. Then use the up and down buttons to select a speed 0-30 (0 being slow and 30 being fast). You must press the enter button to initiate the program |
 |
| Sound
Mode: Use the mode button on the rear of the unit until it reads Auto, Slae, Sond or deco. use the up and down button so that the display reads Sond and then press the enter button. The light will flash on to the beat and change colors each time. |
 |
| For DMX Mode: Set the address for the DMX fixture to A### (depending on where in your DMX chain the fixture is). Channel 1 Master Dimmer : Needs to be up for channels 1-6 to work but, slider 1 does not need to be up for channel 7 functions to work. Channel 2 Master Strobe : 1-60= Gradual strobe slow to fast, 61-128= Pulse strobe slow to fast, 129-192= Fade strobe slow to fast, 193-245= Reverse fading strobe slow to fast, 246-255=All lights on,no strobe. Channel 3 controls the red LED's 0-255 dim to bright Channel 4 controls the green LED's 0-255 dim to bright Channel 5 controls the blue LED's 0-255 dim to bright Channel 6 controls the amber LED's 0-255 dim to bright Channel 7 controls the master auto functions : 1-64= RGB on, 65-95= RGB sound active, 96-191= RGBA on, 192-209= Single color change, 210-223= GA alternating with RB, 224-336= RB alternating with GA, 337-255= RA to RGB to BGA color change. How to use this light with the American DJ MyDMX software |  |
| Master/Slave
Mode: Set the master to any auto mode program. Connect the slave fixture to the master using a DMX cable. Using the mode button (on the slave unit), press until you see Scae, dnCo, Soud or Auto on the LED display. Set the LED display to read Scae and press enter. Includes black power cable. |
 |
