![]() |
![]() |
.
.
|
|
Lux Readings at 1 meter:Red 1,180 Green 1,271 Blue 2,600 All On 4,320 |
![]() |
Auto Modes:Use the Up, Down and Menu buttons on the rear of the unit to select one of the auto modes. Press the Menu, then scroll through the list with the Up and Down buttons until the display shows: CC01-CC64 - This setting is for the 64 preset of color shades. This setting will give you different percentages combinations of each of the Red, Blue and Green LEDs in the fixture. RB01-RB16 - This setting is for a color fade out mode (slow-fast) PL01-PL16 - This setting is for fading preset color out and then in again as a new color. Speed from slow-fast. SD01-SD16 - This setting is to control this fixtures color change mode. Goes from one color, straight into the next with not transition (slow-fast) |
![]() |
Sound Mode:
Press the Menu button, then scroll through the list with the Up and Down buttons until the display shows "Soud" This setting will allow the fixture to change colors to the beat of the music. |
![]() |
On Board Mixology: On board mixology is a feature that allows a fixture to create all the colors and shades that a DMX control would allow, without having to program a complicated controller and deal with cables. This feature lets you pick one of 255 shades for each colored LED installed in the fixture (Red, Green, Blue and White and/or Amber.) This is the same color mixing control as you would get with an expensive DMX controller. Using the Mode, Up, Down and Enter buttons, find the color mixing section of the fixture. The display will read: R### any where from 0-255 will control the Red LEDs (O being no color - 255 being the brightest shade) G### any where from 0-255 will control the Green LEDs (0 being no color - 255 being the brightest shade) B### any where from 0-255 will control the Blue LEDs (0 being no color - 255 being the brightest shade) A### any where from 0-255 will control the Amber LEDs (0 being no color - 255 being the brightest shade) 0### any where from 0-255 will control the White LEDs (0 being no color - 255 being the brightest shade) ***Some fixtures do not have White and/or Amber, so it is important to read descriptions before you buy to make sure you are getting a fixture with the capabilities you require.*** ***Amber and White may have different designation so always test to make sure*** |
![]() |
For DMX Mode: Use the Menu, Up and Down buttons to scroll the menu until the display reads d###. Use the Up and Down buttons to select the desired DMX value. Channel #1 0-255 Master Dim (must be up for fixtures to light up) Channel #2 0-255 Controls the Red LEDs Channel # 3 0-255 Controls the Green LEDs Channel #4 0-255 Controls the Blue LEDs Channel #5 0-7 No Function 8-255 Strobe (slow-fast) Channel #6 0-10 Manual fucntions (must be off for Channels #1-5 to work) 11-60 Auto Mode #1 (CC Function - speed controlled by Channel #7) 61-110 Auto Mode #2 (RB Function - speed controlled by Channel #7 111-160 Auto Mode #3 (PL Function - speed controlled by Channel #7) 161-210 Auto Mode #4 (SD Fucntion - speed controlled by Channel #7) 211-255 Sound Active Mode Channel #7 0-255 Control the speed of Auto Modes (slow-fast) How to use this light with the American DJ MyDMX software |
![]() |
Master/Slave Mode:
Set up the first fixture to any auto or sound feature. Then connect the second fixture through a DMX cable. Using the Mode, Up, Down and Enter buttons below the LED display, press the buttons until D001 show on the display. The slave fixture will begin to mimic the first. Includes black power cable. |
|