Stage Ape Lighting Stage Ape Lighting



.

.

.

Home

stage ape

stage ape

Read Our Warranty
and Store Policies.

Click Here!
stage ape
stage ape The Ape WHIRL18x3... stage ape
NEW DMX MOVING HEAD WASH.

High output DMX-512 Moving Head Wash with 18x 3W LEDs (6 Red, 6 Green & 6 Blue) rated @ 50,000 hours.

Modes Include: Auto mode (fast and slow), sound active, DMX and master/slave.

4 or 12 channel DMX. Auto mode uses 16 preset color combinations. Pan and tilt angle percentage control.

Power consumption 90 watts.

Unit size 10" x 6" x 6" Weight 8 lbs.

Download the instruction manual HERE.

WHIRL18x3
stage ape Click Here To Purchase stage ape

Lux Readings at 1 meter:


Red                678
Green          1,660
Blue             3,380
All On          3,460

Instructions for Operation:

Auto Modes:

Fast Auto Mode:
Press the mode button below the LED display. Press the mode button until NAFA/NASL/NSTS/NSTc/SLAu show on the display. Then use the up and down buttons to reach NAFA on the display. Then press enter. Fast will then show up on the LED display and the light will begin auto fast mode.

Slow Auto Mode:
Press the mode button below the LED display. Press the mode button until NAFA/NASL/NSTS/NSTc/SLAu show on the display. Then use the up and down buttons to reach NAFL on the display. Then press enter. SloU will then show up on the LED display and the light will begin auto slow mode.

Strobe Auto Mode:
Press the mode button below the LED display. Press the mode button until NAFA/NASL/NSTS/NSTc/SLAu show on the display. Then use the up and down buttons to reach NStc on the display. Then press enter. crUn will then show up on the LED display and the light will begin auto strobe mode.
WHIRL18x3
Sound Active Mode:

Press the mode button below the LED display. Press the mode button until NAFA/NASL/NSTS/NSTc/SLAu show on the display. Then use the up and down buttons to reach NStS on the display. Then press enter. Srun will then show up on the LED display and the light will begin sound active mode.
WHIRL18x3
DMX Mode:

Press the mode button below the LED display. Press the mode button until d001 appears on the display. Use the up and down buttons to select the DMX address of the fixture. This light can run in 5 or 13 channel DMX. Use the mode button to find either 5ch or 13ch on the display. Then use up and down buttons to change between settings. Then press enter to set the light.

4 channel mode:

Channel #1 Pan
Channel #2 Tilt
Channel #3 Master Dim/strobe
         0-134 Dimmer (Bright - Dim)
         135-239 Strobe (slow-fast)
         240-255 All open/on
Channel #4 Controls Colors
         0-7 Not used
         8-21 White
         22-34 Red
         35-48 Dark Green
         49-62 Dark Blue
         63-76 Light Blue
         77-90 Magenta
         91-118 Yellow
         119-132 Purple
         133-146 Blue/White
         147-160 Aqua
         161-174 Teal
         175-188 Lime Green
         189-202 Light Aqua
         203-216 Green/white
         217-230 Violet
         231-255 Color fade (fast-slow)
  WHIRL18x3
12 channel mode:

Channel #1 Pan
Channel #2 Fine Pan (moves very slightly for finer accuracy)
Channel #3 Tilt
Channel #4 Fine Tilt (moves very slightly for finer accuracy)
Channel #5 0-255 Pan and Tilt movement speed (fast-slow)
Channel #6 0-7 Closed
         8-134 Master dim (bright-dim)
         135-239 Strobe (slow-fast)
         240-255 Open
Channel #7 0-255 Controls Red LED's (dim-bright)
Channel #8 0-255 Controls Green LED's (dim-bright)
Channel #9 0-255 Controls Blue LED's (dim-bright)
Channel #10 Controls Colors
         0-7 Not used
         8-21 White
         22-34 Red
         35-48 Dark Green
         49-62 Dark Blue
         63-76 Light Blue
         77-90 Magenta
         91-118 Yellow
         119-132 Purple
         133-146 Blue/White
         147-160 Aqua
         161-174 Teal
         175-188 Lime Green
         189-202 Light Aqua
         203-216 Green/white
         217-230 Violet
         231-255 Color Change
Channel #11 Color change speed (channel #10 must be set on color change)
Channel #12 0-127 8 Preset color and movement locations
         128-255 Preset color and movement locations that will change to sound

How to use this light with the American DJ MyDMX software
WHIRL18x3
Slave Mode:

Set the first fixture to any auto or sound active feature. Then connect the second fixture using a DMX cable. Using the mode button below the LED display, press the mode button until NAFA/NASL/NSTS/NSTc/SLAu show on the display. Then use the up and down buttons to reach SLAu on the display. Then press enter. Son will then show up on the LED display and the light will begin to mimic the first.
power cord

Click Here To Purchase

Back


  2010 by Stage Ape Lighting